Water Management
StormDrain Plus
Improved Drainage The durability & high performance of Fernco StormDrain Plus ensures a long lasting, permanent solution for the removal of standing surface water. Simple Accessory Attachment. No clips or screws required to assemble.
Water Well Debris Traps
Prevents loose debris from infiltrating pump suction area. Debris Traps eliminate the common problem of loose dirt and stones invading the pump suction area in water wells. The trap is quickly and easily installed over the well casing and secured with stainless steel clamp.
Downspout Connectors
Seals infiltration out of downspouts. Fernco's Flexible Downspout Connectors stretches easily over most common downspouts and drain pipes to seal out problem causing debris and pests.
Universal Downspout Connectors
For the connection of standard and non-standard downspouts. The unique design of Fernco's Universal Downspout Connector allows for the easy connection of standard and non-standard downspouts to 6” sewer pipe and allow for offset installations.
Sump Pump Check Valves
Reduces sump pump wear and tear. Fernco Sump Pump Check Valves allow unrestricted water to flow through the pipes, but when the pump turns off, the water does not flow backwards into the sump pump, which would typically cause damage.
Hyperflex
HyperFlex is a single component, pre-catalyzed hydrophobic polyurethane grout that has proven to be extremely versatile in a variety of infrastructure rehabilitation applications. The effectiveness and flexibility causes HypefFlex to be the ideal product for repairs in tunnels, manholes, concrete dams, car park decks, bunds, culverts and more.
SealGuard II
SealGuard II, a Polyurethane Grout, is designed for high inflows in precast, cement or brick underground infrastructure to effectively seal active infiltration and leakage in even the smallest fractures. Opposed to covering a leak, SealGuard II is injected directly into the flowing water, causing the infiltration to instantly stop in its tracks. This process rapidly fills the void within three seconds, without any absorption of water or future leakage.
X-Seal
SealGuard II, a Polyurethane Grout, is designed for high inflows in precast, cement or brick underground infrastructure to effectively seal active infiltration and leakage in even the smallest fractures. Opposed to covering a leak, SealGuard II is injected directly into the flowing water, causing the infiltration to instantly stop in its tracks. This process rapidly fills the void within three seconds, without any absorption of water or future leakage.